Pro Boat PRB3450 - Manual (Page 5)

5
EN
 7. Tie a knot with a line to fix the railing
line and cut off the excess lines.
 8. Repeat step 6 and 7 to finish all the
railings and railing line installation.
 9. Apply a drop or two of thin CA to each
of the points where the front railing fits
into the railing stands on the hull.
 10. Apply a drop or two of thin CA to
each of the points where the railing fits
into the railing stands on the hull.
 11. Apply a drop or two of thin CA to
each of the points where the stern railing
fits into the railing stands on the hull.
 12. Apply a drop or two of thin CA to
each of the knots of the line to prevent
the knots from coming loose.