Pro Boat PRB2200 V.1 - Manual (Page 12)

Section 7: Maintainance (cont.)
12
 4. Carefully pull the ferrule away from the
stuffing tube. You will need to pull at an angle to
clear the aluminum strut.
 5. Liberally lubricate the entire length of the flex
shaft with cable grease as shown.
 6. Carefully re-install the flex shaft and nylon
bushing, making certain that you correctly tighten
the collet nut. Next, re-install the drive shaft and
propeller and tighten set screws on the flats of
the drive shaft.