Pro Boat PRB2050T - Manual (Page 3)

3
Suggested Field Equipment and Supplies
Additional Required Items
Engine Tuning Screwdriver (DYN2775)
Replacement Glow Plugs (DYN2508 or DYN2500)
Hex driver/Allen wrench (2.5 mm)
Cable grease to lubricate drive shaft
Clean towels
“AA” alkaline batteries
Adjustable wrench (small)
Extra Propellers (PRAB230)
Contents
• Assembled ShockWave 36 Nitro RTR
• JR
® Python radio transmitter
• Boat stand
Although the ShockWave ™ 36 comes fully assembled and ready for action, you will need a few tools to get you ready to run your boat.
You will need the following:
Blue Thunder ™ 20% Fuel (quart) (DYN2320)
500cc Fuel Bottle (DYN2003) or
Fast Tap Quart Bottle Spout (DYN2009)
Glow Plug Wrench (DYN2510)
Ni-Cd Glow Driver (DYN1925)
12 “AA” alkaline batteries (8 for the transmitter and 4 for the receiver)
Clear tape to seal radio box
In addition to the items needed to run the ShockWave 36, we recommend that you carry the following in your field box: