phil&teds cocoon genius - Manual (Page 24)

Removing and Re-fittng the cover /23
6.1 Removing the cover
The seat cover can be removed from the
cocoon genius seat and is washable only.
• Pull and hold the centre adjuster button to
loosen the belts.
• Release the child seat buckle by pressing
the red button, then split the buckle tongues
on each side of the seat.
• Remove the headrest cover from the
headrest by unhooking the elastic band
from the hook stands (6-A).
• Unbutton the cover at the seating portion
of the covers. Unhook all the elastic bands
from its hook stands, so you can remove
the seat cover from the seat (6-B).
• Don't remove the harness system on the
seat.
6.2 Re-fitting the cover
• To refit the seat cover on the seat just hook
up the elastic bands to its hook stand,
button up the cover connecting parts.
And fit back the headrest cover (6-C).
Simply proceed in the reverse order of section
6.1.
Caution! Ensure that the straps are not twisted
and that they were correctly inserted in the
recesses of the cover.