phil&teds e3 twin buggy - Manual (Page 8)

four: handling her
handle
1.
Push hood forward to access top
of frame.
2.
Press in buttons ‘a’ on inside of handle
(both L and R sides).
3.
Hold both buttons in and pull handle
up until you hear a clear ‘click’. Ensure
buttons
‘a’ pop out again.
If you’re not happy with lower handle
setting adjust to higher setting:
4.
Push in buttons ‘a’ on either side on
the inside of the handle again.
5. Pull handle up to higher postion until
you hear a clear ‘click’. Ensure buttons
‘a’ pop out again.
a
‘a’
push
in
`
6
When pulling buggy
ALWAYS adjust handle to
ensure it aligns with frame
as per photo.
brakes
Now you’re up and running don’t let buggy
get away on you - use brakes.
1.
Stand behind buggy and push brake
lever down with foot. This will put
brakes on. Push up to take brakes off.
off
on
Safety Wrist Strap - Your buggy can be free wheeling
without the brakes so the safety wrist strap should be
worn at all times when pushing the buggy. Just loop it
round your wrist.