phil&teds e3 twin buggy - Manual (Page 10)

newborn buggy
(carry newborn babies)
1.
With buggy set up ready to go,
apply brakes.
2.
Undo 2 clips at back of seat, ‘a’ and ‘b’ .
ups ` downs
a
b
3.
Undo clips ‘c’ and ‘d’ at top of seat
base and push base corners down
until it is almost flat.
4.
Undo zips fully
on either side of
seat base for a
completely flat
newborn bed.
5.
Lie baby flat
in newborn
position, facing
c
d
The back flap can be
rolled up and held
at top using strip
of hook/loop tape
at top.
WARNING: Never
allow the plastic to
fall over the child.
1
2 2
3 3
forward, and secure baby firmly with
adjusted safety harness.
6.
Repeat for other seat.
using the clear plastic back flap
1.
Attach clear plastic back flap using
hook/loop tape at top, ‘1’ , and sides, ‘2’
and ‘3’ .
9 8