phil&teds e3 twin buggy - Manual (Page 7)

`
`
a
b
three: up ` running
to fold
1.
Press lever ‘b’ and pull lever ‘a’
(autolocks) on either side at bottom of
frame seat with fingers whilst holding
frame with palms of hands.
2.
Let handle drop down, lift buggy by
cross bar (parallel to bumper bar) ‘c’ ;
front wheels (swivel) fold under frame.
3.
Attach wrist strap around main buggy
frame to help hold it folded.
Make sure children are clear of buggy before folding,
unfolding or adjusting the buggy. Watch fingers - injury
may result.
5
4.
Ensure levers ‘a’ and ‘b’ (autolocks) are
properly engaged (as above).
Ensure that you hold the main
frame of the buggy when lifting in
and out of car.
1.
Turn buggy over onto 4 wheels.
2.
Pull up rear frame.
3.
Pull up until you hear a resounding ‘click’.
Ensure that locks are engaged. Seats
should now be firmly in place.