phil&teds sport v1 - Manual (Page 8)

hood
The sport hood is packed disconnected.
To reconnect:
1. Locate sun hood and hold it facing
down, as shown ‘a’.
2. Insert crimped wire ends into frame,
through eyelets, ‘b’.
3. Lay hood back (to top of buggy).
4. Locate red coloured pocket at top of
fabric seat and insert rear hood wires
into each side, ‘c’ and ‘d’ .
four: handle ` hood
handle
1. Depress both grey buttons.
2. Move handle up or down to
desired position.
3.
Release buttons
to lock handle
in position.
Safety wrist strap – Your buggy can be free wheeling without
the brakes so use the safety wrist strap at all times. Just loop it
around your wrist.
6
brakes
Now you’re up and running don’t let buggy
get away on you - use brakes.
1. Stand behind buggy and lift brake lever
up to deactivate. Push down to put
brakes on.
stop
Always apply brakes when parking your buggy.
Brakes will be on when you unpack your buggy.
Apply brakes before loading/unloading children.
go
a
b