phil&teds sport v1 - Manual (Page 17)

tricks ` treats
buggy liners
buggy bunny
1. Place in buggy and feed
harness straps through gaps.
2. Attach hook and loop
tape at rear of hood.
woolly ` warm
1. Feed harness straps through
slots on rear of liner (cut new
slots as required).
sleep sack
1. Feed harness straps through slots
on rear of sleeping bag.
2. Unzip top fully to use as a liner.
3. Snaps on top allow for
larger opening.
15
a
b
bacpac X
Put it on your back or attach it to your buggy.
1. Remove 2 straps looped through D rings,
‘a’ and ‘b’ , at top of bacpac.
2. Attach clips on straps to bacpac D rings,
‘a’ and ‘b’ , and attach straps around
buggy handle using snaps.
3. Use hook/loop tape on bottom of 2
shoulder straps to attach bacpac to either
side of buggy frame.
4. Bottle/snack holder clips into holder
on buggy side (right hand side when
standing at back of buggy).