Perfect Aire PAC18000 - Manual (Page 7)

AIR CONDITIONER FEATURES(CONTINUED)
TO TURN UNIT ON:
NOTE: The following instructions represent the Unit Controls, the same instructions can be used
for the Remote Control.
TO CHANGE TEMPERATURE
SETTING:
Press the On/Off button.
DO THIS:
Press to lower
DO THIS:
Press to raise
Press or hold either Up( ) or Down ( ) button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62 F(17 C) and
86 F(30 C). If you want the display to read
the actual room temperature, see To Operate
on Fan Only section on page7.
NOTE:
TO ADJUST FAN SPEEDS:
Press to select
appropriate fan
speed
DO THIS:
There are Four(4) fan speeds, Auto, Low, Med
or High. Each time the button is pressed, the fan
speed mode is shifted. On Dry mode the fan speed
is controlled at low auotomatically.
NOTE:
6
Temp
Timer Check
Filter
High Med
Follow
Me
Auto Low
Fan
On/Off
Sleep Timer
Temp Temp
Timer
High Med
Timer
On Off
Follow
Me
Auto Low
Fan
Sleep Timer
Temp Temp
Timer
High Med
Timer
On Off
Follow
Me
Auto Low
Fan
Clean
Air