Perfect Aire PAC6000 - Manual (Page 11)

INSTALLATION INSTRUCTIONS
Lock Frame
(2) Sash Lock
(1)
Mounting Hardware(Included)
TOOLS NEEDED:
Phillips Screw Driver (not included)
Drill(If pilot holes are needed)
CAUTION: Two person installation recommended.
When handling unit, be careful to avoid cuts from
sharp metal edges and aluminum fins on front and rear coils.
Before installing unit, the top rail must be assembled
on the unit.
Tool Needed: Phillips Screwdriver (not included)
A: Remove the air conditioner from the carton and place
on a flat surface.
B: Remove top rail from the rear of the packaging material
as shown in Fig. A.
10
C: Align the hole in the top rail with those in the
top of the unit as shown in Fig.B
Fig.B Fig.C
D: Secure the top rail to the unit with the 3/8
Screws as shown in Fig.C.
NOTE: For safety reasons, all four(4) screws
MUST be securely fastened.
,,
Your air conditioner is designed to install in standard double hung windows with opening widths of
23 to 36 inches(584mm to 914mm) (See Fig.1).
Lower sash must open sufficiently to allow a clear vertical
opening of 13 inches (330mm). Side louvers and the rear
of the AC must have clear air space to allow enough airflow
through the condenser, for heat removal. The rear of the unit
must be outdoors, not inside a building or garage.
NOTE: Save Carton and these Installation Instructions
for future reference. The carton is the best way to store unit
during winter, or when not in use. Never store unit on its side..
Fig. 1
INNER
INTERIOR
WALL
Wooden Windows
WINDOW SILL
Packaging
Fig.A
Top Rail
3 4 (or 1 )
Screws
(7)
2
Top Rail Hardware
3 8 Screws
(4) Top Rail
(1)
or
Do not drill holes into the housing of the unit.
(Included)