Philips AZ2710-17 - Manual (Page 5)

I #
iмj /" м ; %■;' ;гчг: cì fii ;:
- CO OI*EN: V^en the CD (ioor is open.
- TottI track RunriMr ami plpiyiag time: In stop position.
- fkKNwt track mtaiber aiiii elapsed playing time: During CD play.
- In PAUSE position, the display freezes and the elapsed playing time
and the current track number are shown.
- SHUFFLE/REPEAT: When the respective mode is activated.
- PROGRAM: When program function is active.
- no SEL: PROGRAM button is pressed but no tracks are selected.
- prag: Whan you store a track.
- pfKMMMi FULL Maximum track number stored.
- nopnif: When PROGRAM is stopped/erased.
- no di$C: Error in CD operation or with the CD (see
'TROUBLESHOOTING').
t Set the squffie selector ® to CD.
Z Press OPEN ^ to open the CD door
3. Insert the AUDIO CD. printed side facing up. To close the CD door,
push the door down.
4. Start playback by pressing PLAY*PAUSE Nl(i$.
5. Adjust the sound using the VOLUME ▲ ▼ C?), TONE 0 and DBB (D
controls.
6. To interrupt playback, press PLAY*PAUSE HI Press
PLAY*PAUSE Mlig) again to continue playback.
7. Press STOP*Cj| to stop CO playback.
8. Set the source selector (è) to TAPE/OFF position to switch off the set.
/Vote: CD playback will also stop when:
- The CD has reached the end;
- The CD door is opened;
- The source selector 0 is in the TAPE/OFF position.
SEARCH KM or MK
Selecting a different track during playback
- You can jump to the next track by pressing SEARCH qs) once. If you
want to skip more than one track, press SEARCH more than
once until the display shows the desired track number.
- If you want to repeat the running track from the beginning, press SEARCH
MMi once. If you want to repeat one of the previous tracks, press SEARCH
m ife) more than once until the display shows the required track number.
Starting with a particular track
1. In the STOP position you can select a desired track using the SEARCH
or HH
Z Press PLAY»PAUSE HI @ to start playback.
10
^ Swirching for a passaga witkia a track
You can search for a passage within a track. The CD is played at low
1j|5le№^ and at high $p$Iid.ihdw8ver, the sound is still recognizable.
I.
Keep the SEARCH M4.^i3r m button pressed during playback, and
r leleara the button as soon^ you recognize the required passage:
‘ ~ Normal CD playback will resume at this point.
The MODE button allows you to select four different modes. The modes
^ be selected or longed before or during playback.
filPress MODE anti) the desired function appears on the display.
SHUFUE- Tracks are played 'in random order.
*■' SHUFFIE REPEAT ALL - To repeat the CD continuously in random order.
REPEAT ALL - F^ats the entire CD.
ftIMEPEAT 1 - Continuous playback of the current track.
- Except for REi^T 1. during playback you can use SEARCH w* or
to skip tracks.
- The SHUFFLE/REPEAT modes can also be further combined with
PROGRAM.
Z To leave the SHUFFLE mode, press the MODE button @ repeatedly
until the various SHUFFLE/REPEAT modes are no longer shown on the
display. You can also press STOP ■ @ to quit playback.
You may store up to 20 tracks in the memory in the desired sequence.
You may store any track more than once.
Programfiiing track numbers
f. Select the desired track using SEARCH m
shows the required track number.
Z Store the desired track by pressing PROGRAM (y) once
3. Select and store all desired tracks of a CD in this way.
огмм @ until the display
Checking e program
I. To review the set program, press PROGRAM @ more than 2 seconds.
- The display will show the track numbers you have selected in
sequence.
Z Start playback of the program by pressing PIAY*PAUS£ HI
Erasing a progrmi
You can erase a prt^m by:
- pressing STOP* @ during programming;
~ pressing STOP*@ again in stop position;
- pressing STOP * @ twice in play mode;
- opening the CO door.
11