Recording, Recording from other sources – Philips FW555C37 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RECORDING
Notes:
- For recording, use only tape of lEC type I
(normal tape) or lEC type II (Cr02l
- The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for six to
seven seconds.
- The recording level is set automatically,
regardless of the position of Volume,
DBB, Incredible Surround or DSC.
- To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect
-
If T'i lECK TFiPEI" is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape
detection hole when covering the tab
opening.
Recording from other sources
(only on tape deck 2)
1 Press TAPE (TAPE 1 «2) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 (For model FW555C Tape Deck 2 only)
Press
SIDE on remote control to select
the recording side.
-* The BACK or FRONT flag will be
displayed, depending on the side
selected.
4 (For model FW555C Tape Deck 2 only)
Press
A. REV to select the playback
mode(ZI or
ZD).
5 Press CD, TUNER or AUX
• Start playback of the selected source.
6 Press REC to start recording.
-* The REC flag starts flashing.
7 Press ■ to stop recording.
Notes:
- Only
Z
or
ZD
mode is available
during recording (For model FW555C
Tape Deck 2 only).
- During recording, it is not possible to
listen to another source.
22