Tape, Selecting external equipment, Aux selecting external equipment – Philips FW555C37 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TAPE
During playback
• Press and hold ◄◄or ►►until the
desired passage is located.
— During searching, the sound is
reduced to a low volume.
When you release ◄◄ or ►►, the
tape continues playing.
Notes:
- During rewinding or fast forwarding of a
tape, it is also possible to select another
source (e.g. CD, TUNER, orAUX).
- Before use, check and tighten slack tape
with a pencil. Slack tape may get
jammed or may burst in the mechanism.
- C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
- Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV, or speaker).
AUX
Selecting External Equipment
If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player, or CD
Recorder) to the AUX IN terminals, you can
hear the enhanced sound from the system.
• Press
AUX to select the external mode.
"FiU.X" will be displayed.
• Press
AUX again to select AUX-CDR
mode.
'’CDR" will be displayed.
Notes:
- There are two AUX modes:
i. the normal AUX mode.
a. the CDR mode; where the LINE OUT
of this mini system is muted. You will
not he able to record or listen to the
sound from the LINE OUT.
- You are advised not to listen to and
record from the same source
simultaneously.
- All the sound control features (e.g. DSC,
DBB, etc.) are available for selection.
21