Re m – Philips MX2790B User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
F
eati
RE M
em
C
ontroes
(
contim
ed
)
!□
rAHi.i; riMN(;
'\7ou need to make sure the TV is
J. set to pick up either Cable TV
or Antenna signals. In other words,
the TV needs to know if you
connected a Cable TV signal or a
normal antenna to its ANTENNA
plug.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU ( M ) t b u t t o n s .
Then press the MENU button.
<|> Press the MENU AV buttons
to move the RED highlight. Press
the MENU button to select (u^) the
desired mode - For Example:
CABLE.
CABLE-
NORMAL-
If you DO have
Cable TV connected
to the TV. Channels
1-
125 available.
If you have an
Antenna connected
to the TV. Channels
2- 69 available.
Press the STATUS button to
clear the screen.
> FEATURE MENU
NORMAL ANT A
CABLE ANT B
NORMAL ANT B
Note: Both ANT(enna) A and ANT B inputs
on the rear of the TV can be set for the correct
connected signal (either an Antenna or Cable
TV source).