Vavl, Or off, Spatial – Philips 27PT6442-37 User Manual
Page 20: Or mono, Vsap, V sound, Or stereo
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
ound
M
enu
controls
T
'o adjust your TV sound, select and
use the Soun
use
below:
: Sound Menu Controls listed
Treble: Press the CURSOR
RIGHT > or LEFT < buttons
to adjust the control. The control
will enhance the high hequency
sounds.
Bass: Press the CURSOR
RIGHT > or LEFT < buttons
* to adjust the control. The control
win enhance the low hequency
sounds.
^ Balance: Press the CURSOR
I RIGHT > or LEFT < buttons
^ to ai^ust the level of sound com
ing horn the leh and right speak-
i Main
▲ 1
0 Picture
Treble
1 '/Sound
► 1 Bass
o Features
Balance
o install
AVL
Incr. Sunound
tdoie..
1 ▼
V Treble
AVL: (Auto Volume Leveler)
£4 Press the CURSOR RIGHT >
^ or LEFT < buttons to turn the
control On or Off. "'^en On, AVL
win level out the sound being
heard when sudden changes m
volume occur during commeicial
breaks or channel clianges.
^ Incr. Slirrolind: Press the CUR-
^ SOR RIGHT > or LEFT < but-
^ tons to select between Dolby
Virtual or Stereo settings (If
Stereo), or select Spatial or Mono
(If Mono).
# SAP: Press the CURSOR
RIGHT > or LEFT < buttons
^ to toggle this control to On or Off.
SAP is short for Secondary Audio
Prograniming and is sent as a
third audio channel, a SAP signal
can be heard apart from the cur
rent TV program sound.Note: If
SAP is not present on a selected
show No SAP will appear on the
screen.
Sound: Press the CURSOR
I RIGHT > or LEFT < buttons
^ to select between Stereo or Mono
settings. Note: If Stereo is not
jTCsent on a selected show and the
TV is placed in the Stereo mode,
the sound coming from the TV
win remain in the Mono mode.
V Bass
■
50
►
◄ L
VAVL
On
or Off
Spatial
or Mono
V
incr. Surround
Dolby Virtual
or Stereo
VSAP
or Off
V Sound
Mono
or Stereo