Gi.oss, Lo 1, Ision – Philips 19PS50S99 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Gi.oss
AR\
lo 1
i
:
li
:\
isioN
T
erms
Auto Picture Booster • A control that will automatically ampli
fy “weak video signals” to a point where they are acceptable for
viewing.
Auto Programming • The procedure of adding or deleting
channel numbers into the Television’s memory circuits. In this
way the Television “remembers” only the locally available or
desired chatmel numbers and skips over any unwanted chaimel
numbers.
Closed Caption • Broadcast standard which allows you to read
the voice content of television programs on the TV screen.
Designed to help the hearing impaired this feature uses on
screen "text boxes" to show dialogue and conversations while
the TV program is in progress.
Coaxial Cable • A single solid antenna wire normally matched
with a metal plug (F-type) end connector that screws (or pushes)
directly onto a 75 Ohm input found on the Television or VCR.
Front Audio/Video Inputs • Located on the front of the TV
these connectors (phono type plug) are used for the input of
audio and video signals. Designed for easy use with VCRs or
cameras.
Menu «An on-screen listing of feature controls shown on the
Television screen that are made available for user adjustments.
On Screen Displays (OSD) • Refers to the wording or mes
sages generated by the television (or VCR) to help the user with
specific feature controls (color adjustment, programming, etc.).
Quadra Surf • The feature that allows the programming of four
separate Surf lists holding up to 10 channels each.
Remote Sensor Window • A window or opening found on the
Television control panel through which infrared remote control
command signals are received.
Status/Exit • Allows the user to quickly confirm what channel
number is currently being viewed. Status can also be used to
clear the Television of on screen displays or information (rather
than waiting for the displays to “time out” or automatically dis
appear from the screen).
Twin Lead Wire • The more commonly used name for the two
strand 300 Ohm antenna wire used with many indoor and out
door antenna systems. In many cases this type of antenna wire
requires an additional adapter (or balun) in order to connect to
the 75 Ohm Input terminals designed into the more recent
Televisions and VCRs.
IXiner Mode • Designed for first time set up and use to set the
TV for antenna or cable TV signal connections.
40