Using the s-video inpet jacks, Using the s-video input jack – Philips 19PS50S99 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U
sing
the
S-V
ideo
I
npet
J
acks
7
he S(uper)-Video connection on the
rear of the TV can provide you with
better picture detail and clarity for the
playback of accessory sources such as
DBS (digital broadcast satellite), DVD
(digital video discs), video games, and
S-VHS VCR (video cassette recorder)
tapes than the normal antenna picture
connections.
NOTE: The accessory device must
have an S-VIDEO OUT(put) jack in
order for you to complete the connec
tion on this page.
Connect one end of the S-VIDEO
CABLE to the S-VIDEO jack on the
back of the TV. Then connect one end
the AUDIO (red and white) CABLES
to the AVI in AUDIO L and R(left and
right) jacks on the rear of the TV.
Connect other end of the S-
VIDEO CABLE to the S-VHS (S-
Video) OUT jack on the back of the
VCR. Then connect the oflier ends of
the AUDIO (red and white) CABLES
to the AUDIO (left and right) OUT
jacks on the rear of the VCR.
<î>
Tarn the VCR and the TV ON.
Press the CH + or - buttons on the
remote to scroll the channels xmtil
SVHS appears in the upper left corner
of the TV screen.
Slide the TVA^CR/ACC switch to
jj the VCR position.
Now your ready to place a prere
corded video tape in (he VCR and
press the PLAY ^ button.
The S-VIDEO and VIDEO
AVI in(puts) are in parallel. The
S-VIDEO input is dominant when in
use. If separate video signals are con
nected to the S-VIDEO and VIDEO
AVI in(puts), the signal from the
VIDEO AVI in(put) will not be usable.
Note: SVHS will e^pear as a valid
channel option only if a S-Video
device is connected to the S-Video
Input. If no device is connected to
the S-Vdeo Input, the channel will
appear as AVI.
25