Philips MC-320-37 - Manual (Page 18)

Tape Operation / Recording
Synchro start CD recording
Select CD source.
Insert a disc and if desired, program track
numbers.
Press A to open the tape door.
Insert a suitable tape into the deck and close the
tape door.
Press REC to start recording.
REC is shown during recording.
Playing of the CD program starts
automatically from the beginning of the CD
after 7 seconds. It is not necessary to start the
CD player separately.
6 To stop recording, press STOP I
2
3
4
5
Recording from the radio
Select TUNER source and tune to the desired
radio station (see "Tuning to radio stations").
Press A to open the tape door
Insert a suitable tape into the deck and close the
tape door.
Press REC to start recording.
REC is shown during recording.
To stop recording, press STOP ■.
Recording from Aux
1 Select AUX source.
2 If necessary, prepare the additional appliance for
recording,
3 Press REC to start recording.
REC is shown during recording.
4 To stop recording, press STOP ■.
Recording timer
To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1 Insert a suitable tape into the deck.
If desired, press REV to select tape reverse
mode option.
PLAY 1 SIDE : for recording one side only
PLAY A AND B ; for recording on both sides
REPEAT A AND B : for recording on both sides
2 Select TUNER SOURCE and the preset radio
station to record from,
3 Press STANDBY ON to switch the system to
standby mode. Press TIMER SET /1< for more
than 2 seconds.
O flashes and a source is displayed.
4 Press SOURCE repeatedly, until RECTUM
source is displayed.
5 Press TIMER SET /1< to confirm the source.
SET uff f I"1T is displayed, and the clock
digits for the hours flash.
6 Press VOLUME -/+ to set the hours.
7 Press TIMER SET/
1< again.
The clock digits for the minutes flash.
8 Press VOLUME -/+ to set the minutes.
9 Press TIMER SET /1< to confirm the ON start
time,
-k O.CT
OLI nrr I If iT is displayed, 0 and the T "TT m C
clock digits for the hours flash.
10 Repeat steps 6-8 to set the finish time.
11 Press TIMER SET / K t o confirm the timer
settings.
0; is shown and the recording timer is now
set.
18