Philips MC-320-37 - Manual (Page 11)

Preparations
FM Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGF^T" and left
speaker to "LEFT", colored (marked) wire to
"+" and black (unmarked) wire to " —",
• Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
- For optimal sound performance, use the
supplied speakers.
- Do not connect more than one speaker to any
one pair of -hi — speaker terminals.
- Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Optional connection
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of a TV, VCR, Laser Disc player; DVD player or
CD Recorder to the AUX terminals.
Note:
- If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX left terminal. Alternatively, you can use a
“single to double” cinch cable (the output sound
still remain mono).
1
2
Before using the remote control
Pull out the plastic protective sheet.
Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example CD,TUNER).
Then select the desired function (for example
>11, l< >l).
plastic
protective
sheet
Replacing battery (lithium
CR2025) into the remote control
Pull out the knob (A) slightly to the left.
Pull out the battery compartment ( b ) .
Replace a new battery and fully insert the
battery compartment back to the original
position.
CAUTION!
Batteries contain chemical substances, so
they should be disposed off properly.
11