Philips MC-320-37 - Manual (Page 13)

Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
Press o STANDBY ON.
*♦ The system will switch to the last selected
source.
Press CD, TUNER, TAPE or AUX on the
remote control.
•4 The system will switch to the selected source.
To switch the system to standby mode
Press 0 STANDBY ON.
If in recording mode, press STOP ■ first.
The volume level(up to a maximum volume
level of 20), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.
Adjusting volume and sound
Press VOLUME-/ + to decrease to increase
volume on the system.
Display shows the volume level »'uL and a
number from MINI, 2, ...38, 39 MAX.
Press DSC repeatedly to select the desired
sound effect: CLASSIC/JAZZ/ ROCK/
OPTIMAL.
Press DBB to switch bass enhancement on or
off.
Display shows: DBB ON or DBB OFF.
Press IS on the remote control to switch the
surround sound effect on or off.
■4 Display shows: IS ON or IS OFF.
Note:
- The effect of INCREDIBLE SURROUND may
vary with different types of music.
Press MUTE on the remote
control to interrupt sound u u
reproduction instantly.
■4 Playback will continue
IS MUTE
without sound and the display
shows ilLlFc.
MUFFLE
To activate sound reproduction
- press MUTE again;
- adjust the volume controls;
- change source.
you can:
13