Cisco 32369 - Manual (Page 25)

ip dhcp conflict logging
Cisco IOS DHCP Server 25
ip dhcp conflict logging
To enable conflict logging on a Cisco IOS Dynamic Host Configuration Protocol (DHCP) Server,
use the ip dhcp conflict logging global configuration command. Use the no form of this command
to disable conflict logging.
ip dhcp conflict logging
no ip dhcp conflict logging
Syntax Description
This command has no arguments or keywords.
Defaults
Conflict logging is enabled.
Command Modes
Global configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0(1)T.
Cisco recommends using a DHCP server database agent to store automatic bindings. If you decide
not to use a DHCP server database agent to store automatic bindings, use the no ip dhcp conflict
logging command to disable the recording of address conflicts. By default, the Cisco IOS DHCP
Server records DHCP address conflicts in a log file.
Example
The following example disables the recording of DHCP address conflicts:
no ip dhcp conflict logging
Related Commands
clear ip dhcp conflict
ip dhcp database
show ip dhcp conflicts