Culligan H-30 - Manual (Page 11)

Fig. 3
Fig. 2
Tubing Connectors
The Good Water Machine
™
system features two simple types of tubing
connectors. Tubing can be connected easily as follows:
Push-in type (Fig. 2)
To connect, lubricate the tubing end with water and push the tubing into the
connector until it bottoms out. Be sure the tubing is smooth and free of
scratches, otherwise a leak my result.
To disconnect, hold the collar against the fitting body and pull the tube from
the fitting.
Threaded type (Fig. 3)
To connect, assemble the fitting parts onto the fitting, leave the nut loose, and
push the tubing firmly into the fitting until it bottoms out. Hand-tighten the
nut.
To disconnect, loosen the nut and pull the tubing from the fitting.
8