Culligan H-30 - Manual (Page 10)

SERVICING YOUR SYSTEM
FILTER REPLACEMENT
Culligan recommends that you have your Good Water Machine serviced by
your local Culligan Man. You can rely on his or her experience and expertise
to keep your system in top operating condition.
If you wish to service your system, the filters are available from your Culligan
dealer. See the Parts List at the end of this section for replacement numbers.
Cartridge Conditioning
The activated carbon, reverse osmosis, and polishing filter cartridges must be
conditioned as follows prior to installation into the Good Water Machine.
Your Culligan Man can do these important procedures at the time of
purchase.
Activated Carbon Cartridge - 5 gallon flush to remove carbon dust
RO Membrane Filter - 6 hour flush to remove preservative solution
Polishing Filter - 2 gallon flush to remove carbon dust
7
SERVICE SCHEDULE
When properly maintained, your Good Water Machine
™
will give you years of
dependable service. Use the following as a guide to get the most out of your
system. Service frequency may vary depending on your local water condi-
tions. High sediment, chlorine, turbidity, or hardness levels may require more
frequent service. Refer to Figures 4 & 5, on page 9.
At Least Once Per Year
Replace:
• Particle/Activated Carbon Filter(s)
• Polishing Filter
Check:
• RO Membrane Filter
- TDS Reduction Performance
- Flow Rates
• Capillary Assembly
Sanitize the System.
Use the convenient chart inside the back cover of this booklet to keep track
of your system’s maintenance.