Compaq TFT 8000 User Manual

Page 84

troubleshooting

internet access (continued)

Symptom Problem Solution

Cannot automatically start
Internet programs.

You must log in to your ISP
before some programs will
start.

Internet takes too long to
download Web sites.

Modem is not set up
properly.

Verify that the correct modem speed and COM port are
selected:

Click Start, and then click Control Panel.

Click Printers and Other Hardware, if it is present.

Double-click Phone and Modem Options.

Select the Modems tab, and then click the Properties
button.

In the Device status area, verify the modem is working
properly.

In the Device usage area, verify the modem is enabled.

If there are further problems, click the Troubleshoot
button and follow the onscreen instructions.

The AOL program comes up
even it is not being used.

The PC is still trying to use
AOL for Internet access.

You may want to remove the AOL program.
To uninstall AOL:

Click Start on the taskbar.

Click Control Panel.

Double-click Add or Remove Programs.

Select America Online, click Change/Remove, and
then click Yes when the confirmation window opens.

NOTE: Removing the AOL program will not cancel your
account with AOL.

keyboard and mouse

Symptom Problem Solution

Keyboard connector is not
properly connected.

Turn off the PC by using the mouse, reconnect the keyboard
to the back of your PC, and turn on your PC.

Program in use has stopped
responding to commands.

Restart or turn off your PC using the mouse.

Keyboard commands and
typing are not recognized
by the PC.

Keyboard is damaged.

Press the Help ? button on the keyboard to open the Help &
Support Center, or refer to the Warranty & Support Guide
to contact Support for replacement details.

Cursor will not move using
the arrow keys on the
keypad.

The Num Lock key may
be on.

Press the Num Lock key. The Num Lock light should not be
on if you want to use the arrow keys in the number keys
group.

The keyboard Print button
does not work.

Some programs do not
recognize the Print button.

Use the Print menu item in the program.

Wireless keyboard does not
work after installation or is
not detected.

Keyboard batteries are low
or empty.

Replace the two AA alkaline batteries in the wireless
keyboard; then set the ID channel by pressing the Connect
button on the wireless receiver and then on the keyboard.
Refer to the documentation that came with your wireless set.