Compaq TFT 8000 - Manual (Page 73)

66 user’s guide
disabling the tv option
When you want to disconnect the TV from your PC, you may need to disable the
TV option to return your PC display to its original resolution.
1 Right-click an empty area of the screen, and chose Properties.
2 Click the Settings tab.
3 Click the Advanced button.
4 Click the nView tab, click the nView Display Mode in the list on the left, and
then select the Standard [Dualview] option.
CAUTION: If you viewed the PC image on just the TV, do the
following: With Standard [Dualview] selected in the area nView
Display Mode, click the Device Settings button, choose Select Output
Device, and then select the Analog Display option.
5 Click the OK button, and then click OK again.
6 When the PC image appears on the monitor screen, click Yes to keep the
setting. You have 15 seconds to accept this new setting before it reverts to the
previous setting.
disconnecting the tv
1 Disable the TV option. See the previous procedure.
2 Turn off the TV and the PC.
3 Remove the video cable from the TV and the PC.
4 Remove the audio cable from the TV and the PC.
5 Reconnect your PC speaker cable to the Line Out jack (lime green connector)
on the back of the computer.