Compaq 4100 - Manual (Page 37)

A RESTORE_NVRAM and SAVE_NVRAM
A.1 Save NVRAM data in EEROM/TOY to a floppy file.
Save the system NVRAM data from 8KB EEROM and last 50 TOY
RAM bytes onto a write-UN-locked FAT formatted floppy to a file. By
default, if no script argument is specified, all NVRAM is saved to file
ALLNVRAM.SAV. If the file already exists, then a copy of the original file
is made to *.BAK. If that file exists, it is overwritten. Note, attempts to
write to a write-locked floppy fail silently.
Syntax
save_nvram {all,arc,srm,toy}
Arguments
group
Specifies the group of NVRAM data to be saved. One of the following:
• all : All of the 8KB EEROM and 50 bytes of TOY RAM are saved in
file allnvram.sav. This is the default, if no argument is specified.
• arc : ARC (AlphaBIOS) data in first 6KB of the 8KB EEROM is saved
in file arcnvram.sav.
• srm : SRM console data in last 2KB of the 8KB EEROM is saved in
file srmnvram.sav.
• toy : TOY console data in the 50 bytes of TOY RAM is saved in file
toynvram.sav.
Examples
To save all the system NVRAM to an image on floppy:
>>> save_nvram
Save all NVRAM data to file fat:allnvram.sav/dva0.0.0.1000.0.
If file already exists, first copy original to a .bak file.
Please insert a write-UN-locked, FAT formatted floppy...
...and enter "y" and press
Return to continue.
y
Checking for a FAT formatted floppy...
...Found it.
Checking for existing fat:allnvram.sav/dva0.0.0.1000.0...
...Found one.
Copying fat:allnvram.sav/dva0.0.0.1000.0 to .bak file...
...Succeeded.
Copying all NVRAM to fat:allnvram.sav/dva0.0.0.1000.0...
...Succeeded.
>>>
A–1