Casio EX-FH100 - Manual (Page 39)

39
Snapshot Tutorial
• The initial factory default image size setting is 10M (10 million pixels).
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
• Available image sizes are limited for some functions as noted below.
RAW+
This image size can be selected in the Single Shot mode only. This
image size cannot be selected in the High Speed CS, Normal Speed
CS, or F CS mode.
10M
This image size cannot be selected in the High Speed CS mode or when
using some BEST SHOT scenes*. Switching to the High Speed CS
mode or selecting some BEST SHOT scenes* while “10M” is selected
will cause the image size setting to change to “9M” automatically.
3:2,
16:9
These image sizes cannot be selected in the High Speed CS or F CS
mode, or when using some BEST SHOT scenes*.
If “RAW+” is selected in the Single Shot Mode
Doing this
Changes to this image
size automatically
Entering the Normal Speed CS mode 10M
Entering the F CS mode 10M
Entering the High Speed CS mode 9M
If “3:2” or “16:9” is selected in another mode
Doing this
Changes to this image
size automatically
Entering the High Speed CS mode 9M
Selecting some BEST SHOT scenes* 9M
Entering the F CS mode 10M