Philips TP2780C - Manual (Page 33)

S
electing the
P
icture
S
ource for
PIP
□
J f/ie picture for the PIP window
can come through the TV’s
ANTENNA or VCR/AU XInputs (on
the rear of the TV.) The PIP INPU T
control simply tells the TV which
one of these two sources it is to
show in the PIP window.
C begin ]
Press the MENU (M) button on
the remote, then press the MENU
A or T buttons to select the words
PIP INPUT with the TV’s on-screen
arrow.
Press the (+) button to select the
source for the PIP picture:
ANTENNA-
for a picture signal coming from
the ANTENNA input on the rear
of the TV.
VCR/AUX -
for a picture signal coming from
the Video Input jack on the rear
of the TV. Used for VCR (or
other direct video accessory) con­
nections.
Press the STATUS button to
clear the screen.
1 / S mart H elp
Remember, the PIP screen
“ will be blank unless a signal is
connected to the selected source
(either ANTENNA or VCR/AUX) on
the rear of the TV.
With ANTENNA selected (as the PIP
INPUT source), the main screen and
PIP window will show the same pic­
ture. The VCR/AUX inputs (on the
rear of the TV) must be used in order
to see a different channel or picture
source in the PIP window.
SUBF
SLHE?
S=T CLOCK
SSTTifiSB
DPIP INPUT
For details on how to view separate
programs on the PIP window and main
screen, see the PIP connection section.
33