Philips TP2780C - Manual (Page 21)

How
TO U se the A udio A^ hjeo I nput J acks (C ontinued )
□
Z Vie S(uper)-Video connection
on the rear of the TV is used
for the playback ofS-VH S VCR
tapes, Video Discs, Video G am es
or Compact Disc Interactive (cd-i)
discs.
Better picture detail and clarity
is possible with the S-Video
playback as compared to the pic­
ture from a normal antenna (RF)
connection.
C begin )
<|> Connect the S-VEDEO IN
Jack on the TV to the S-VHS
OutCput) jack on a S-VHS VCR.
The S-VHS connecting cable
will be supplied with the S-VHS
VCR (or Video Disc player.)
Also connect the AUDIO
IN(put) jacks from the TV to the
AUDIO OUT jacks on the VCR.
<|> Press the MENU (M) button
on the remote, then press the
MENU A or T buttons to select
the word INPUT with the TV’s
on-screen arrow.
Press (+) button to select the
S-VHS INPUT on the rear of the
TV,
Tam the VCR ON and place
it in the S-VIDEO or S-VHS
mode. Insert a S-VHS cassette
tape and PLAY the VCR in a
normal manner.
\
1
/ S mart H elp
_ Remember, when you're
^ through using the S-VIDEO
IN(put) jack return the INPUT con­
trol on die TV to ANTENNA. If you
leave the TV in the S-VIDEO mode
and there is no signal source con­
nected to the jack, you will be see­
ing only a blank screen on the TV.
PICTURE AND SOUND FROM PLAY­
BACK OF S-VHS VCR TAPE
3
TER
=0
SAP
SOUrlDIWS*
3
?SAKF.rí
DIHPUT
CAB=,£
BACKOFTV-
S-VIDEO CABLE
(NOT SUPPLIED)
RCA PHONO
PLUG CABLES
(NOT SUPPLIED)
BACKOFS-WHS VCR
Example: S-VHS VCR
(EQUIPPED WITH S-VlDEO OUTPUT JACK)
(Could be used with a Video Disc Player,
Video Game Players, CD-i Players, etc.)
NOTE: THE "TV/VCR" BUTTON
CAN ALSO BE USED TO PLACE
THE TV IN EITHER S-VIDEO OR
VCR/AUX MODES (AS WELL AS
SELECT CHANNELS 3 OR 4.)
21