Cissell AJ1032 - Manual (Page 9)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7 AJ1032
Introduction
Nameplate Location
The nameplate is located at the right side of the unit.
Always provide the machine’s serial number and
model number when ordering parts or when seeking
technical assistance.
Figure 1
Parts Ordering Information
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Cissell at (502) 587-1292 for the name and
address of the nearest authorized parts distributor.
General Description
Press is an air operated, steam heated garment press.
Press is designed for pressing of damp garments.
Major press components are:
• Steam heated head and buck.
• One air cylinder dedicated to closing head AND
automatically apply pressing pressure once head
is closed.
• An adjustable muffler that cushions head
opening.
• Head opening springs which extend as head
closes. Springs contract to open head.
• A timer control (optional on some presses) which
automatically opens press head at a set time.
Timer can be turned off for manual operation.
• A two hand, anti-tie down synchronous control
which controls closing of press head.
• A filter, regulator, lubricator and lockout
downstream air relieving shut-off and lockout
valve at air inlet.
Optional Equipment
Optional equipment available for press includes:
• Manual water spray for hookup of city water
• Manual water spray with copper water reservoir
SCR1529C
1 Nameplate
1