OmniSistem PR Panda II (KB) - Manual (Page 7)

CONTROLLER MODE – DMX 512 OPERATION
CONNECTING CONTROLLER WITH PROJECTORS
Connect the controller’s output to the first projector’s input, and connect the first projector’s output to
the second projector’s input. The rest may be deduced by analogy. Eventually connect the last
fixture’s output to a DMX terminator as shown in the figure below.
7/12
panda II manual.doc
DMX 512 CONTROL CHANNEL FUNCTIONS
PANDA II has 4 channels which may be actived by sound via MIC inside the projector or be separately
controlled by the controller. They are listed in the following table.
CHANNEL DMX VALUE DESCRIPTION
0-4 Black-out
5-10 White
11-71
Strobe adjust from slow to fast
72-78 White / Clear
79-86 Light blue / GOBO 1 (Circle)
87-94 Pink / GOBO 2 (Little Circle)
95-102 Blue and yellow / GOBO 3 (Ring)
103-110 Light green / GOBO 4 (8-Circle)
111-118 Ultraviolet / GOBO 5 (4-Sector)
119-126 Violet / GOBO 6 (3-Bar)
127-134 Light red / GOBO 7 (Swirl)
135-142 Green / GOBO 8 (Crisscross)
143-150 Light yellow / GOBO 9 (Multi-circle)
151-158 Blue / GOBO 10 (Little rectangle)
159-166 Red, green, yellow and blue / GOBO 11 (Multi-
quadrangle)
167-174 Green and pink / GOBO 12 (4-bar)
175-182 Yellow / GOBO 13 (Sunflower)
183-190 Red / GOBO 14 (Pentacle)
1
COLOUR / GOBO
191-255 Rotation from slow to fast
2 PAN 0-255 Pan movement from 0°to 175°
3 TILT 0-255 Tilt movement from 0° to 80°
4 DIMMER 0-255 Lamp brightness adjust from dark to bright