O.S. Engines 160FX-FI - Manual (Page 9)

EC-2
CH3
AUX ✽
Lo Mi Hi
1 2 3 4 5 6 7 8 9
AUX
Injection trim can be adjusted independently
for two area as shown in the graph.
Intermediate slow and full high are adjusted
with the injection trim adjustment dial (spare
channel dial) on the transmitter.
Fuel injection volume
(Throttle stick position)
Temperature Sensor
Throttle Servo
Branched Cord
Transmitter
Receiver
Spare Channel
Injector
Rotation Sensor
Fig.1
Fig.2
(8) Integrated Buzzer Buzzer sounds when setting Limit, dial is set nnetral a error happens.
Buzzer notes and status
Notes Status
Nil
One note (Pi)
Two successive notes (PiPi)
*Repeated one note (Pi...Pi...)
*Repeated two successive notes (PiPi...PiPi...)
*Repeated three successive notes (PiPiPi...PiPiPi...)
Normal
Limit at Low is set
Dial neutral
Limit at High is set
Temperature Sensor is disconnected
Error on setting Limit
Battery voltage falls down (below 3.8v)
*mark shows alarm for error.
Throttle Channel
Injection trim adjustment
corresponds to needle-valve adjustment of conventional carburetor)
Full high
Intermediate slow
8
✽