NORAC UC5-BC-CS05 - Manual (Page 20)

17
7.2 Roll Sensor Mounting Guidelines: Trapeze-Suspended Booms
1. When mounting the roll sensors, mount one to the trapeze link (boom frame – lowest
serial number), one to boom carrier frame (intermediate frame) and one to the chassis
(reference frame – highest serial number). For optimal performance, minimize the distance
from the boom frame roll sensor to the pivot point (A) and minimize the vertical distance
between the intermediate frame roll sensor and the pivot point (B).
Figure 16: Roll Sensor Mounting on a Trapeze Suspended Boom
Figure 17: Roll Sensor Mounting (Viewed from the rear of sprayer)
Intermediate
Frame Roll Sensor
Boom Frame
Roll Sensor
Connectors towards
Right-hand Wing 