NORAC 4468BC+ - Manual (Page 6)

4
3
PARTS LISTS
The parts that come with your UC4+ Spray Height Control System are listed in Table 1. The
item number on the left side of this table references each part. Please ensure that all parts
in your kit are present before proceeding with your installation.
Table 1: Enhanced Stability Boom Control System Parts
Item Part Number Name Quantity
B01 100091 TIE CABLE 7.5 IN BLACK 10
B02 100084 TIE CABLE 21 IN BLACK 25
C01 44674 CABLE UC3 SENSOR ROLL BIAS 1
E01 45001* UC4 PLUS ROLL SENSOR VER. 2 1
M01 4468BC+INST UC4+ ENHANCED STABILITY OPTION KIT INSTALL MANUAL 1
* For systems purchased BEFORE October 1, 2011, the roll sensor part number is 44642.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.