NORAC UC4+SM3-4B - Manual (Page 9)

6
7. If the valve block is not already installed
on the sprayer, install it as outlined in
the UC4+ Spray Height Control kit
installation manual.
8. Attach hose H01 to port B on the
expansion block. Route the free end of
the hose (H01) to the Summers valve
block.
9. Remove the main lift hose from the
Summers valve block.
10. Place the 6FJXR 6MJT tee fitting (F02)
on the main lift fitting in the Summers
block.
11. Attach the Summers main lift hose and
hose H01 to the tee fitting.
You must ensure no hydraulic
components will interfere with
any sprayer parts or be pulled
tight at any time.