beautypg.com

3 temperature probe mounting – NORAC UC4+BC+JD11 User Manual

Page 21

background image



18

5. If desired, the roll sensor may be mounted inverted as shown in Figure 18, so long as the

connector still exits towards the right-hand boom. Inverted mounting may be used to
minimize the distance (C) between the roll sensors.

Figure 18: Inverted Roll Sensor Mounting

6.3

Temperature Probe Mounting

1. Fasten the temperature probe (E03) to the UC4 valve block using the included 3/8x1/2”

bolt as illustrated in Figure 19.

Figure 19: Temperature Probe Mounting