NORAC UC4+BC+CS1 - Manual (Page 5)

2
2
GENERAL SYSTEM DESCRIPTION
Figure 1 depicts the general system layout of the UC4+ Spray Height Control System.
Figure 1: System Components and General Location
NOTICE:
Every effort has been made to ensure the
accuracy of the information contained in
this manual. All parts supplied are selected
specially to fit the sprayer to facilitate a
complete installation. However, NORAC
cannot guarantee all parts fit as intended
due to the variations of the sprayer by the
manufacturer. Please read this manual
in its entirety before attempting
installation.
ATTENTION:
When installing the UC4+ System please be
aware that at a point in the installation your
sprayer booms will be inoperative until the
installation is complete. Any installation
procedure requiring boom movement
will need to be done first. Once the
hydraulics have been disconnected you
must complete the electrical installation
before the booms become operative.