Mytek Digital Stereo 192-DSD DAC (v.2.0) - Manual (Page 42)

5. Under the Bus Tab inside the Mytek_FireWire control panel
switch Sync Source: to the Digital format you are using i.e.
AES/EBU, S/PDIF, TOSLINK, ADAT.
6. Under the Bus Tab insde the Mytek_FireWire control panel
switch Sample Rate: to match the Digital Source feeding the
MYTEK Stereo192-DSD DAC.
7. Open your DAW or Archiving Software and select the MYTEK
Stereo192-DSD DAC FireWire as your input source and output.
8. Change the DAW or Archival Software's Sample Rate to match
both the Mytek_Firewire Control Panel as well as the Digital
Source connected.
You are now ready to stream Digital audio through the MYTEK
Stereo192-DSD DAC into your computer.
www.mytekdigital.com Page: 42/48