Mytek Digital Private-Q DL Cable Assembly Using Canare MR202-16AT User Manual
Page 6
11.
Now prepare the power and ground wires (13,14 = GND, 15
= +29V, 16 = -29V) by stripping off ~1/4 inch and also
completely stripping the 3 inner wires and shorting them together.
Wires 13 and 14 have all 6 wires twisted together.
12.
Next is to prepare the male DL connector. For the GND,
+29V, and -29V rows you will have to crimp 18 pins with a stiff,
solid wire. We use a gold plated jewelery wire.