Chicago Electric Stapler/Nailer 93749 - Manual (Page 8)

SKU 93749 For technical questions, please call 1-800-444-3353. Page 8
OpEratiON
tO prEVENt
SEriOuS iNjurY:
Wear aNSi-approved impact
safety goggles during use.
Other people in the work area
must also wear ANSI-approved
impact safety goggles.
triggEr
lOcK
triggEr
FigurE i
1. lock the trigger by moving the
trigger lock to the right. Then, plug
the tool’s Power Cord/Plug into the
nearest 120 volt, grounded, electrical
outlet.
Unlock the Trigger by moving the
2.
Trigger Lock to the left.
To fire, firmly press the Nose of the
3.
Stapler/Nailer on the workpiece.
The Stapler/Nailer should not fire if
the Trigger is not squeezed. Briefly
squeeze the Trigger once; one Sta-
ple/Nail will be fired.
If additional force is needed, your
4.
other hand can be used.
When finished using the Stapler/
5.
Nailer, lock the trigger by moving
the trigger lock to the right. Un-
plug the tool from its electrical outlet,
and remove all unused Staples/Nails
from the tool.
Store the Stapler/Nailer in a clean, 6.
dry, safe location out of reach of chil-
dren.