Chicago Electric Stapler/Nailer 93749 - Manual (Page 2)

SKU 93749 For technical questions, please call 1-800-444-3353. Page 2
SaVE tHiS maNual
Keep this manual for the safety warn-
ings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
impOrtaNt SaFEtY
iNFOrmatiON
in this manual, on the labeling,
and all other information provid-
ed with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
daNgEr indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WarNiNg
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
cautiON, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOticE is used to
address practices
not related to personal injury.
cautiON, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
general power tool Safety
Warnings
WarNiNg read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
Keep work area clean. 1. Cluttered
areas invite injuries.
Observe work area conditions.
2. Do
not use machines or power tools in
damp or wet locations. Do not ex-
pose to rain. Keep work area well lit.
Do not use electrically powered tools
in the presence of flammable gases
or liquids.
Keep children away.
3. Children must
never be allowed in the work area.
Do not let them handle tools or exten-
sion cords.
Store idle equipment.
4. When not
in use, tools must be stored in a dry
location to inhibit rust. Lock up tools
and keep out of reach of children.
use the right tool for the job.
5. Do
not attempt to force a small tool or
attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was