Microtel DialStat (No Fault Indicators) - Manual (Page 28)

MICROTEL DialStat
TM
24
APPENDIX B: Glossary of Dialer Terminology
Acknowledge Stops the dialer from placing additional calls concerning an
alarm condition. Acknowledgment can be made by entering
the '*' during alarm playback, with call-back acknowledge, or
by an auto acknowledge phone escape sequence (*4)
embedded within the telephone number.
Alarm condition An event detected by the dialer usually causing a phone call.
Call-spacing The time delay between successive answered, but
unacknowledged telephone calls.
I/O channel A dialer to outside world connection.
New alarm Any alarm that has not yet initiated a call out sequence or an
alarm still present after the snooze delay.
Phone number A sequence of up to 30 digits used to dial a phone number
and/or perform a dial escape sequence function.
Snooze delay The time between when an alarm is acknowledged and when it
begins to cause calls again.
Unlatched type A fault which self-clears if the alarm-causing condition goes
away.