Microtel DialStat (No Fault Indicators) - Manual (Page 25)

MICROTEL DialStat
TM
21
APPENDICES
APPENDIX A: Technical Specifications
A.1 Communications
Phone Interface: FCC 68 Registration Number:
7AAUSA-25393-AL-E
For connection to PSTN or Cellular network via
Cellular Interface.
Ringer Equivalence Number: 0.7B
LED Indicators: Dialer Active/Ring Detect/Call Progress
Local Telephone Off-hook/Ready to program
Fault
AC Power/Charging
Dialing Capacity: 8 Phone Numbers, 30 Digits Each
Tone or Pulse Dial
Special Sequences for Selection of Pulse/Tone,
Pause, Pagers, Auto-Acknowledging Alarms.
Call Progress Detection Dial Tone Detect
Busy Detect
Ring Back/No Answer Detection
Answer Delay: 1-99 Rings (Call Back Acknowledge)
A.2
Electrical
Input Power: Plug in Wall Power Supply, 120 VAC to 12 VDC
UL/CSA approved.
or 12-20VDC @ 0.5 Amp
Solar Power Interface Compatible
On/Off Switch
Internal Battery-charging circuit
AC Power/Battery Charging Indicator
Resettable Internal Fuse
Optional: Micromax Surge Suppresor
Battery Operational: Rechargeable 6-AA cells NiCad Battery Pack
(24 hour standby, 6 hour active calling, typical)