Microtel CellStat v.1.22 - Manual (Page 32)

MICROTEL CellStat
TM
30
APPENDICES
APPENDIX A: Technical Specifications
A.1 Communications
Phone Interface: ACTA ID:
US: 7AAAD00BDS65616
For connection to PSTN
Ringer Equivalence Number: 0.0B
Cellular Interface: Enabled with installation of a GSM SIM card and
External antenna (usually done at factory); front-
panel cellular status indication and volume control.
Cellular Approvals: Cingular Wireless Approved; Rogers Wireless
Approved; T-Mobile Wireless Network Compatible
LED Indicators: Dialer Active/Ring Detect/Call Progress
Local Telephone Off-hook/Ready to program
Fault/Normal status for each input channel
Cellular Status: signal strength or call in-progress
AC Power/Charging
Dialing Capacity: 8 Phone Numbers, 30 Digits Each;
Wireless Email Alert to a single email address;
Wireless logging of alarm events to Log-Stat™
web-based application;
Tone or Pulse Dialing via the PSTN;
Special Sequences for Selection of Pulse/Tone,
Pause, Pagers, Auto-Acknowledging Alarms;
Cellular voice callout, cellular SMS Text Message
Alert.
Call Progress Detection Dial Tone Detect
Busy Detect
Ring Back/No Answer Detection
Answer Delay: 1-99 Rings (Call Back Acknowledge) via PSTN
1 – 3 rings via the buit-in cellular interface.
A.2
Electrical