MF Digital DIRECTOR EC OFFICE PUBLISHER WITH Spectrum2 PRINTER - Manual (Page 13)

Aligning the Drive Tower
(fig. 3)
(fig. 4)
(fig. 5)
1. From your Start Menu Open the EC Alignment
Utility (fig. 1). It will be located in the folder
designated when you installed the alignment
utility. Choose COM Port 2, which the
Director EC Loader is installed. Select all
other printer types and drive bay. Click on
Perform Test.
2.
Follow the instructions by opening the top
CD/DVD drive tray, and Clicking Yes (fig. 2).
The picker arm will hover a disc over the drive
tray, observe the discs position and make the
adjustments to the drive tower (fig. 3).
3.
Click Yes when you are satisfied with your
adjustment (fig. 4).
4. The picker arm will then place the disc onto
the drive tray. Follow the on screen
instructions and click OK (fig. 5).
5. Once you are satisfied with the drive tower
alignment, tighten the thumb-screws located
on both sides of the drive tower (fig. 6).
(fig. 6)
(fig. 1)
(fig. 2)
Page 13