MF Digital ScribeEC with NO PRINTER - Manual (Page 3)

333
Page 3
Scribe EC no Printer Installation Guide
Document Revision: 2004/12/28
Mounting the Firewire Adapter Card
DVD dive ScribeEC requires only one PCI
firewire B controller card (IEEE-1394B).
1. Shut down the PC.
2. Turn the PC’s power off.
3. Unplug the PC’s power cord.
4. Remove the PC’s cover as
indicated in the PC’s manual.
5. Locate an empty PCI slot, as
seen in (fig.1).
6. Install the firewire adapter card (fig. 2).
Installing the Drive Bay
(fig. 2)
The internal configuration of your computer may be different from the computer picture below
Note:
1. Place the drive bay onto the base unit as seen in
(fig. 1).
2. Position the drive bay so that the front right
corner sits over the dotted line (fig. 2). Proper
position is shown in (fig. 3).
(fig.1)
(fig. 2) (fig. 3)
(fig. 1)