MF Digital CD-3703 (Rev: 08/01/02) - Manual (Page 19)

CD-3706/P
Operator’s Guide
Document Revision: 030501.1 CD-3000 Series Operator’s Guide
Document Revision: 100102
Page 18
• Press the “STOP/NO” key to exit
• Press the “5” key on the keypad. The screen will now read:
S T A R T I M P O R T I N G A U D I O ?
[ S T O P ] = N O [ S T A R T ] = Y E S
• By using the Audio Track Import feature, audio compilation discs
can be created one track at a time from one or more masters.
• Manually place an audio master disc into drive number 1.
• Press the “START/YES” key
• Press the number of the track you wish to import and press the
“START/YES” key. Only one track may be imported at a time. All of
the tracks will create one master image on the hard drive.
• Once you have imported all of the tracks, copy the image you just
created from the hard drive as you normally would.
• Press the “6” key on the keypad. Something similar to the following
will be displayed in sequence:
1 (0 ,0 ) G E N E R I C C R D B P 1 7 0 0
v : m d 0 0 R I D :00 0 9 0 2 0 5 7 0 8 9
This display is the device information for the recorder installed in the
3000 Series. This includes it’s host number, model name, and
firmware version.
• Press the “7” key on the keypad. The screen will now read:
C L E A R H D ?
• Press the “START/YES” key to clear the hard drive.
If the “STOP/NO” key is pressed you will be prompted to set the
“System Time.”
S E T S Y S T E M T I M E ?
• Press the “START/YES” key to set the system time.
If the “STOP/NO” key is pressed you will be prompted to “Read
Watermark.”