MF Digital Rimage Prism Plus Thermal - Manual (Page 8)

Page 8
Director EC Office Publisher
with Prism PLUS Printer
Installation Guide
Document Revision: 12/28/2004
Adjusting the Prism Plus Printer Driver Settings
Printing Preferences
To change the printing preferences for the Prism
Plus printer, please do the following:
1. Go to Start-> Settings -> Printers
2. Right-click on the Rimage Perfect Image
Printer PF printer in the Printers Folder
3. Go to Printing Preferences and click the
Advanced button
4. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
5. To save settings, click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
Printer Spooling
It is important to disable printer spooling on the
Prism Plus printer. To do so, please follow the
steps below:
1. Go to Start-> Settings -> Printers
2. Right-click on the Rimage Perfect Image
Printer PF printer in the Printers Folder
3. Go to Properties
4. Go to the Advanced Tab
5. For the Scribe Program to use the printer
effectively, please match the settings of
your printer driver to the example on the
right-side of this page.
6. To save settings, Click Apply and OK to
exit.
***NOTE: Any changes made to the printer
driver settings, require a NEW PRN file to be
made. If you change one of the settings, be sure
to create a NEW PRN file.***