MF Digital AP-1301 - Manual (Page 28)

AP-1301 i/t
Operator’s Guide
Document Revision: 100102
Page 27
you to print relative to the artwork on a pre-silk screened disc. In other
words, you can have your CD-Rs silk screened with generic artwork,
and then customize them by printing in an area left for the title. The
SmartAlign feature will rotate the disc before printing, so that the
overprint is in the area left for the title or unique information.
LABEL FILE
The “Label File” field displays the desired label file to be used for printing.
Only “.LBL” and “.PRN” are used.
Note: PRN files are created when the printer properties port setting is set to
PRINT-TO-FILE. This allows other applications to create printable files.
These files must be created with the appropriate printer, either the
Primera or the MediaFORM Spectrum, set as the default printer. These
files are essentially captured printer dump files. PRN files, once created,
are not editable. It is also important to note that they contain all printer
settings. In the event of a problem when using a PRN file as the source,
check your printer’s settings in START-SETTINGS-PRITNERS, and then
regenerate the PRN file. These setting will be saved within the PRN file
and will over-ride any current printer settings.
To select the desired label file, the steps are as follows:
• Click on Browse Print Files. The following dialog box will be
displayed: